1. Do not move radiators easily. When designing and installing radiators, you should choose a location. Do not move them easily. This may lead to leakage of radiators and other accidents. In the case of a last resort, professional construction personnel must be invited.
2. The radiator should not be too close to the furniture. Because the temperature of the radiator itself is very high, if it is too close to the furniture, the furniture will be cracked, the paint will be dropped, the service life will be reduced, and the maintenance of the furniture will be very unfavorable.
3. Do not place water in the radiator. If the use of hot water is convenient for home use, the use of hot water in the radiators will reduce the capacity of hot water in the radiators, and accordingly, it will need to supplement some of the cold water, thus reducing the overall heating effect. Very unwise. Steel radiators are easy to use, but it is more important to use them properly. Only the correct method of use can ensure the normal operation of the radiators. Remember that the use of steel radiators does not require three processes and enjoys a warm life.

PEEK (Poly Ether Ether Ketone) is a high performance engineering thermoplastic that offers chemical and water resistance similar to PPS, but can operate at higher temperatures. PEEK can be used continuously to 250°C and in hot water or steam without permanent loss in physical properties. For hostile environments, PEEK is a high strength alternative to fluoropolymers. PEEK carries a V-0 flammability rating and exhibits very low smoke and toxic gas emission when exposed to flame.

PEEK SHEET

Peek Sheet,Peek Plate,Peek Plate Sheet,Peek Plastic Sheet

Ningbo Zero Engineering Plastics Co.,Ltd , https://www.zero-peek.com