【Chemical Pump】 UHB-UF (UP) chemical engineering plastic pump is an all-plastic corrosion-resistant wear-resistant pump, the structure of the pump body are wrapped inside and outside the plastic, the middle with supportive (tensile and compression deformation) Corrosion of steel skeleton (wear) pump. Now to introduce the characteristics of chemical engineering plastics pump and technical parameters. Chemical Engineering Plastics Pump First, the characteristics of chemical engineering plastics pump 1. Overcoming the anti-corrosion plastic lining pump anti-corrosion and high manufacturing costs shortcomings. Preserves the lined plastic pump steel strength, ease of installation advantages. 2. To overcome the plastic plastic pump due to linear expansion coefficient, the pump by the expansion and contraction of the axial deformation, resulting in poor mechanical stability of the whole plastic pump, easy to damage the inadequate, but effectively retained the plastic pump both inside and outside anti-corrosion , The use of corrosive air conditions, the surface will not corrode, the advantages of good corrosion resistance. 3. With "U00" plastic formula, wear resistance than similar pumps increased by 30 ~ 40%; 4. The new sealing structure, sealing long life (patented B-type seal). Second, the chemical engineering plastic pump technical parameters 1. Imported diameter Φ32 ~ 250mm total; 2. Flow range 5 ~ 800m3 / h; 3. Head: the minimum lift 5m (pressure 0.05MPa), the highest lift 80m ); 4. Sealing form and structure: B-type dynamic seal and mechanical seal. Further Reading: pump valve pipe fittings Exhibition 2016 Exhibition of Information Industry, Internet (Xiamen) Technology Co., Ltd. Author: Asian pumps Network Editor: Yao Xiaoxia (QQ / micro letter:) http://beng.liuti.cn/ (Hotline :)

Kitchen Cutlery

Kitchen Cutlery,Kitchen Knife Set,Kitchen Knives,Kitchen Cutlery Set

YangJiang Junxiong Trading & Industry Company Co.,Ltd , https://www.cn-sundo.com