Manual Call Point With Key,Intelligient Manual Call Point,Manual Call Point,Fire Alarm Manual Call Point TANDA Development Pte.Ltd , https://www.tnafirealarm.com
/*728*90 created on 2018/5/16*/ var cpro_id = "u3440131";
Home>Bearing knowledge>Teach you how to store bearings
Teach you how to store bearings
Bearing storage method:
/*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089';
1. Only the relative humidity of the storage room does not exceed 60%; the temperature does not change much; the bearing can be stored in the original packaging for several years.
2, sealed bearings or bearings with dust cover; after a long time of storage; the smooth properties of the smooth grease filled in the bearing may be reduced. The storage room should also be sensational and rocking.
3. Bearings not stored in the original packaging should be kept in good condition; avoid corrosion and pollution.
4, large rolling bearings can only be placed flat when placed; the side of the inner and outer ring is the best supported.
5. If it is an upright storage; because the inner and outer rings and the rolling parts are heavier; the inner and outer ring walls are relatively relatively.
Recommend to friends comments close window
Bearing related knowledge Mill protection protection: the replacement of the grinding roller to remove the axial displacement of the bearing bearing analysis of the bearing pre-code to clarify the import of the bearing to remove the SKF bearing problems
This article links to http://
Please indicate the bearing network http://
Previous:The application of "high-rigidity bearing" is discussed in detail in the next section: Equipment and protection of rolling mill bearings (1)
Manual Call Point With Key,Intelligient Manual Call Point,Manual Call Point,Fire Alarm Manual Call Point
TANDA Development Pte.Ltd , https://www.tnafirealarm.com